Rated voltage: DC6-12.8V ( recommendation 12V , not exceed 12.8V )
Current Rating: 40A ( within 5 seconds maximum can not exceed 40A )
Nominal power: 360W
Signal voltage: 5V 0.5A
Temperature protection: 110 ℃
Speed range: 8% to 98% ( instead of starting from 0 )
Adapter motor poles: 2-18 pole
Start: flexible start / immediate start
Brake: reverse load / no brake
Speed signal: 8Khz / 16Khz fixed-frequency PWM
Servo test function: 55g or less
1. Safe Boot : When the governor throttle potentiometer is not in the lowest position, the access to power the motor will not start immediately, to prevent high-speed assault, which is necessary in the high-power high-speed motor, ensure user safety.
2. Temperature protection : the governor comes with its own aluminum fins, long-term full load 30A run without pressure, when there is an overload of 110 degree heat, a protection signal detection system in temperature between MOS tube group, the system automatically reduces 60% power output, protection and motor speed control board, the temperature dropped to normal after recovery full power, prolonged high current work needs to pay attention to the heat drives, in order to avoid reducing the driving lifetime .
3. Anti signal loss : When used with an external PWM signal generator (potentiometer) no communication signal, automatically shut down.
4. Power Recognition : governor comes with power recognition system, specifically designed for high-speed high-power motors HM-level customization, when access to the motor, the system is first initialized with the motor paired with resistance testing of the motor, if the toy-level low-power motors (coil is very small, less power, high resistance), when adjusting potentiometer big process, speed control system will be interrupted tentative output, the performance of the motor "shake not turn", three seconds after completely shut off the output, so as to avoid motor and speed control board be burned. ( Therefore, this governor is not suitable for small power brushless motor )
5. Function programmable : Speed is based on SCM Microsystems, some features may make changes based on the needs of its programmable function (red for the default factory settings, the user can control the manual programming card program according to their needs)
① start-up mode - flexible acceleration Start / direct start
② Brake - Reverse load fast braking / free brake
③ into the angular size - small / medium / large
④ low voltage protection - low / medium / high
⑤ Battery Type - Lithium / Ni-Cr / NiMH / Lead Acid
⑥ restore factory settings - you can misuse option clears
6. Auxiliary functions (only do motor drive please ignore) : external PWM signal generator PWM speed control signal can be issued and to be issued a steering angle instruction, it can be used to test the steering gear 55G below, there are three mode can be selected (manual + auto + about return), you can switch to achieve through the button, and another three blue LED lights on the PCB, the operating mode at a glance.