روتاری انکودر نوری 360 درجه دو فاز

Rotary encoder
ناموجود
متاسفانه این کالا در حال حاضر موجود نیست. می‍توانید از محصولات مشابه این کالا دیدن نمایید
موجود شد به من اطلاع بده

Specifications:
DC5-24V wide voltage power supply
Speed: more than 5000 r / min
Shaft: 6mm/0.23" Dia, 13mm/0.51" Length
Size: 39mm/1.53" Dia, 36.5mm/1.43" Length
Output: AB 2phase output rectangular orthogonal pulse circuit,
the output for the NPN open collector output type

Performance:
400,360,600 pulses / rev. Operating voltage: DC5-24V , maximum mechanical speed 5000 rev / min, the electrical response frequency 20K / sec, the integrated speed 2000 rev / min.   Size: The encoder body size: Phi 38mm ; shaft φ6 × 13mm; axis platforms: High 5mm, φ20mm; fixing holes: M3 screws, three mounting holes on the circle 30 and the other three mounting holes in round 28 on;

Wiring:
Green = A phase, white = B phase, red = Vcc positive power supply, black = V0 to please the wiring as described above. Another metal shielding layer interference.

Output:
AB two-phase quadrature output rectangular pulse, the circuit output is NPN open collector output type, this type can be output with internal pull-up resistor is directly connected microcontroller or PLC, such as 51 or microcontroller Mitsubishi PLC (PLC input of should play a role switch connected to 0V) Note: If the encoder is not connected to the device can not be directly oscilloscope oscilloscope (open collector output when there is no pull-up resistor, there is no voltage output) To Oscilloscope please plus two pull-up resistor AB two-phase output;

Uses:
used to measure the rotation speed of the object, angle, acceleration and length measurements.

Use:
suitable for intelligent control of various displacement measurement, automatic fixed-length leather automatic guillotine machines, steel cutting fixed length control, civil measured height human scale, Students racing robots.


Features: Small size, light weight, ease of installation, high cost of significant advantages.

 Note: A phase and B-phase output line must not be directly connected to VCC, otherwise, it will burn the output triode.

شناسه کالا: 365999
اشتراک‌گذاری

شبکه‌های اجتماعی:

آدرس کوتاه شده‌ی صفحه: برای کپی کردن لینک روی آن کلیک کنید
نظرات
    ارسال نظر